What to know about AV control systems in Avondale
The noise rule has no number, so limits matter
Avondale makes unreasonably loud, disturbing and unnecessary noise a misdemeanor and names sound systems that disturb people nearby. With no decibel figure to aim at, a control system that caps each zone's level does a job a staff reminder can't.
A schedule can enforce the BLVD cutoff
In The BLVD, outdoor concert facilities and outdoor commercial recreation or entertainment uses in the Gateway and Park Avenue subdistricts can't run music or sound amplification from 11:00 p.m. to 8:00 a.m. Dance floors must close when the bar closes. The section was amended April 6, 2026, so check the current text for your lot. A controller can mute outdoor zones on a timer.
Screen signs must dim and stay static
Where Avondale allows a variable message sign, it must dim automatically, change no more than once every eight seconds and use no video. Control for an outward-facing screen has to stay inside those limits.
Plans follow the 2024 codes
Avondale's building codes took effect January 1, 2026: the 2024 International Codes and the 2023 electrical code, with city amendments. Low-voltage cabling is not on the permit exemption list, so we confirm with Building Services at (623) 333-4000, per the city's adopted amendments.
What a control system does
A control system sits between your staff and the equipment. Instead of hunting for the right remote, they press a button labeled Open, Close, Game Day or Private Event, and the controller turns on screens, picks sources, sets music zones and dims lights in the right order.
Tablet, wall panel or app
A wall panel is hard to lose and suits a bar. A tablet has room for more buttons and can be docked. An app lets a manager adjust things from the floor, with permissions that keep guests out. Many restaurants put a wall panel at the bar and an app on the managers' phones.
Presets, limits and schedules
The useful part is what staff can't do. We set a maximum volume for each zone, lock the patio below the main room, and schedule zones to mute or power down at a set time.
Presets keep the room consistent. A Friday-night setting, a lunch setting and a closing routine are buttons anyone can press.
- Level limits per zone, set in the amplifier and the controller.
- Timers for outdoor zones, with a manager override.
- Screens that power on and off with the room.
Lights, shades and other systems
Control can reach past AV. Many systems also run lights, motorized shades and projector screens. We connect to equipment you already own when it supports control and tell you when it doesn't. If a device can't be controlled, a small relay or IR emitter can often make it turn on with the room.
Every control system has a manual fallback. If the panel or network fails, the amplifier and screens still work from their own front panels and remotes, and we label where those are.
We keep a copy of the programming for you. If a tablet breaks or a device is replaced later, the system can be restored without starting over.
Programming the system
- List every device and how it connects.
- Draft the buttons, presets and limits, and review them with you.
- Install and program around your business hours.
- Train your staff and leave a laminated one-page guide.
- Service continues Monday to Friday, 8 AM to 5 PM.
Often paired with
Control is the layer over commercial audio, TV and video distribution and conference rooms, and it can only run what the gear underneath supports. Call (602) 769-7992 to talk through your room, or see Enzo in Avondale.
