What to know about video distribution in Queen Creek
Restaurants and bars are listed as coming Downtown
The Town's economic development list shows restaurants and bars coming to the northeast corner of Ellsworth Loop and Ocotillo, including Postino Wine Cafe, Snooze, Shake Shack, Bamboo Sushi and Salt & Straw. It also names The Perch at Ellsworth and Munoz and The Rusty Buckle Saloon. The list is undated and gives no opening dates. If you are building out a space like these, the time to plan TVs is before the walls are closed.
Source: InvesttheQC, New Businesses
Low-voltage wiring may be exempt. Power is a separate question.
The Town's electrical permit-exemption list includes low-energy Class II and Class III power, control and signal circuits. It also covers wiring under 27 volts that cannot supply more than 50 watts. The outlet and circuit behind each TV is not covered by either item, and whether your job is exempt is the Building Official's call.
Source: Town of Queen Creek Town Code 7.1.4.2.3 (amendments, Oct. 19, 2022)
Call before you assume no permit
The Town says permits are required before any construction project and that its office decides whether one applies. The Building Safety Division line is (480) 358-3009, listed on the Building Codes page, and it is also where permit, plan review and inspection questions go.
Each tenant space needs its own application
A commercial tenant space needs its own building permit application, submitted online with electronic plans. If your TV wall is part of a larger build-out, the screens and mounting details go in with the rest of that package.
What video distribution is
Instead of a cable box behind every TV, the sources live in one rack. Cable, satellite, streaming and a signage player all sit there, and the picture travels to each screen over cable. Staff choose what each TV shows from a remote, wall panel or phone.
It also makes service easy. When a box fails, you swap one unit in the rack and not a box behind a mounted TV.
Matrix switcher or video over network
A matrix switcher routes each source to any screen over HDMI-based cable. It suits smaller rooms and short runs, and the wiring is simple. Video over a network uses ordinary network switches and can scale to dozens of screens and long runs, with the added cost of more network gear.
We pick based on your screen count, your distances and how often you expect to add TVs.
- Under about ten screens in one building, a matrix is often the cleaner choice.
- Many screens, several floors or a planned expansion usually point to video over a network.
- Either way, we run a spare cable to each TV position.
TVs, mounts and placement
Commercial displays are built to run all day. We place screens so most seats see one, avoid glare from windows and patio doors, and set mounts to the right height for the room. Outdoor TVs need weather and sun ratings, and a shaded location helps them last.
Planning for a new Queen Creek space
A restaurant going into a new tenant space is the best case. Cable paths, outlet positions and mounting blocking are cheap to add before drywall and expensive after. We walk the plans with you, mark where every TV, rack and cable run goes, and give you the details to pass to your electrician.
If you reuse TVs or boxes you already own, we connect to them where they still work.
How an install goes
- A walkthrough or a plan review to count screens and sources.
- A layout with screen positions, cable paths and rack location.
- Cable and mounts first, then the screens and the rack.
- Testing every source on every screen, then training staff.
- Service after the install, Monday to Friday, 8 AM to 5 PM.
Often paired with
Video usually goes in with commercial audio so the game sound lands in the right zone, and with AV control for one-panel operation. Menu screens are covered under digital signage. Other systems for a bar or restaurant are on Enzo in Queen Creek.
